Furious BlackBerry (PACK 4) dongle - user manual - how to make it all working

[..::Waqar@Hussain::..]

many customers ask so is time to make it >>thx to daniel/steve for providing this quality software

BLACKBERRY DONGLE SOFTWARE INSTRUCTIONS

STEPS:

1- visit the site -plz book mark it , its
www.furious-gold.com

Also plz visit this link gives u more info on the product – very helpful

http://www.furious-gold.com/modules_...p?module_id=57

2- visit the web site www.download.com , search for the winrar software , plz download it and install in your machine .

3- visit the web site www.furious-gold.com and download the maintanance software , u can find it easily on the front page .

4- plz go to www.blackberry.com , search for desktop manager , download in your machine and run it plz .

5- plz attach the blue colour usb dongle we have sent u in any of your usb port , let the windows xp search its drivers , once it say drivers are found and is ready to use , we are ready to go .

6- plz extract or unzip the maintenance software , select pack 4 , click firmware update box and press do job . this will update your dongle to the latest firmware pack available for the black berry software , it takes around less than 5 min to update the dongle and end it says dongle update successfully .in case of any error plz close all your antivirus and windows firewall and try again .

7- once you have update the dongle now you need the software to run it , plz click go support area in maintenance tool , this will take you to the support area , now you have to download the software for pack 4 – which is black berry software . its exe or setup normally is under this name . BBERRYST_V1.0.0.493_PLATINUM
What so ever version is available there is the latest one . plz make sure u have to keep coming to the web site for all future updates (which are normally free )

8- once u have download the software , plz close the maintance soft and open the bb software . now get ready to unlock your first handset. Plz make sure your mobile fone don’t have any password on it , if it has plz disable it from menu. If u cant disable or some how password is enabled on the fone , your fone will not be detected by the software.
Plz disable the mass configuration box , press do job and insert the cable in the fone ( make sure ur fone is turned on for this operation )
Note: don’t insert the cable first in the fone , first press do job than insert cable

9- software will read the fone and give u unlock code/mep2 code in the software window . as this operation takes max one minute.

10- now we have to enter the code inside the fone , for this plz put any sim card inside the fone . go in options /advance options /sim card
Now dial on fone key pad mepd , after mep2 ( plz make sure while typing 2 , use the number key) insert the code in and once it says code accepted , fone is unlocked



br,

Gohar